5cladba kit , help info
- Thread starter sirmtr
- Start date
I tried this once and didnt have much good luck but this is what a supplier gave me! AGAIN I SOMEHOW FAILED AND HAVE NO CLUE WHY.
*********************************
!!!!DO NOT TAKE THIS AS FOR SURE ADVICE. I AM SIMPLY SHARING WHAT A SUPPLIER GAVE ME AND IT DIDNT TURN OUT GOOD THE FIRST TIME!!!!!
**********************************
The Main material 1kg Im not sure what this one is.
DMF CAS 68-12-2 3L
850g of Potassium carbonate CAS 584-08-7
5bromo-1pentene 500g
Step 1
Put the DMF into machine and start stir,then put all the main material in.Waiting about 10
minutes,put the 850g of potassium carbonate in and turn on heating,maintain heating rate
at 300-380.Turn off the heating when reaching 55 degrees.
PS:The potassium carbonate will not sink to the bottom if reacts sufficiently.
Step 2
Stir for a minute and get the bromo pentene in drop by drop slowly.At this time
the temperature will slowly rise.
Step 3
When the bromopentene are fully add in. Watch the temperature in machine and turn on
heating.Keeping the temperature at 85-90 degrees for 3 to 4 hours.
Step 4
Turn off the heating after 3 to 4 hours and waiting cool down to roomS temperature.If you
want to cool it quickly,fill it with ice cubes.
Step 5
The potassium carbonate needs to be completely washed off.Otherwise the purity of finished
product will be reduced.Potassium carbonate is soluble in water.Neutral,indicating that all
the potassium carbonate already has been washed off by water.
Prepare ice water(4-5 times of DMF)in a container,the ice water means crushed ice with
low temperature water under 20 degrees.Put the cooled reaction liquid into ice water
slowly.There will be white or little yellow color being start separated out.
30 minutes after putting all the cooled reaction liquid into ice water,stir slowly by speed of
100 rolls per 2 minutes.Repeat this process three times until the wash water's PH is 7 or
under 7,then filter the solid.The white powder filter cake is the finished product.
Step 6
Dry the solid,it can be air-dried at natural temperature
*********************************
!!!!DO NOT TAKE THIS AS FOR SURE ADVICE. I AM SIMPLY SHARING WHAT A SUPPLIER GAVE ME AND IT DIDNT TURN OUT GOOD THE FIRST TIME!!!!!
**********************************
The Main material 1kg Im not sure what this one is.
DMF CAS 68-12-2 3L
850g of Potassium carbonate CAS 584-08-7
5bromo-1pentene 500g
Step 1
Put the DMF into machine and start stir,then put all the main material in.Waiting about 10
minutes,put the 850g of potassium carbonate in and turn on heating,maintain heating rate
at 300-380.Turn off the heating when reaching 55 degrees.
PS:The potassium carbonate will not sink to the bottom if reacts sufficiently.
Step 2
Stir for a minute and get the bromo pentene in drop by drop slowly.At this time
the temperature will slowly rise.
Step 3
When the bromopentene are fully add in. Watch the temperature in machine and turn on
heating.Keeping the temperature at 85-90 degrees for 3 to 4 hours.
Step 4
Turn off the heating after 3 to 4 hours and waiting cool down to roomS temperature.If you
want to cool it quickly,fill it with ice cubes.
Step 5
The potassium carbonate needs to be completely washed off.Otherwise the purity of finished
product will be reduced.Potassium carbonate is soluble in water.Neutral,indicating that all
the potassium carbonate already has been washed off by water.
Prepare ice water(4-5 times of DMF)in a container,the ice water means crushed ice with
low temperature water under 20 degrees.Put the cooled reaction liquid into ice water
slowly.There will be white or little yellow color being start separated out.
30 minutes after putting all the cooled reaction liquid into ice water,stir slowly by speed of
100 rolls per 2 minutes.Repeat this process three times until the wash water's PH is 7 or
under 7,then filter the solid.The white powder filter cake is the finished product.
Step 6
Dry the solid,it can be air-dried at natural temperature
- By Mr.Ben
First, the material ratio is wrong. The first step is to put your materials in order.
Secondly, your machine speed and temperature need to match. What is the RPM of your mixer? Temperature control involves a changing process.
When drying products, the melting point of the product is 45 degrees and cannot be heated and dried.
Secondly, your machine speed and temperature need to match. What is the RPM of your mixer? Temperature control involves a changing process.
When drying products, the melting point of the product is 45 degrees and cannot be heated and dried.
Your supplier is not providing you with the correct recipe.
And can’t they follow you through the entire production process?
And can’t they follow you through the entire production process?
We not only provide customers with precursor materials, but if the customer does not know how to cook, we provide detailed cooking techniques and follow-up guidance throughout the process.
- By William D.
Offer other methods without heating. I think you know these methods, and this is needed for some buyers. If you do not know, then write to me. This will add part of the sales and production of an additional quantities of products.
I think your supplier is trying to give you instructions on how to get the finished product from the precursors （MDMB-INACA, cas NO: 2709672-58-0）
But if you want better guidance, please tell me and I will help you
But if you want better guidance, please tell me and I will help you
- By William D.
Do you sell intermediate reagents (precursors) or are you teaching complete synthesis?