1-fenil-2-propanon (P2P) szintézis dietil(fenilacetil)malonátból
- Thread starter G.Patton
- Start date
Egyszerű desztillációra gondol a vákuumos helyett? Megteheti, 216 fok C a forráspont normál körülmények között.
Srácok, ne dőljetek be a szent reflux kultuszának. A refluxálás önmagában nem ér semmit, kivéve annak az illúzióját, hogy valami történik, amit létrehoz.
H2SO4 és oxálsav (a legjobb), de foszforsav és bármilyen szerves sav, például ecetsav, hangyasav vagy citromsav esetén szinte mennyiségi hozamot lehet elérni, ha az elegyet lassan, két órán keresztül 95 °C-nál NEM HOSSZABB-ra melegítjük, 30 percig ott tartjuk, majd hagyjuk lehűlni. Adjunk hozzá kis mennyiségű, a DCM-től eltérő oldószert (toluol, xilol, éter), mivel a szerves sav kihullhat, ezért ajánlatos felülről gyűjteni. Használható benzin-éter 40/60, és nem kell sok, de a végén HÁROM réteget kapunk: A legfelső réteg benzin-éter, P2P oldottal. A középső réteg P2P pet-éterrel feloldva*. Alul pedig a savas keverék (ami egyébként gond nélkül újra felhasználható).
*Furcsán hangzik, de ez így van: A Pet-Ether és a P2P is oldja a másikét, de nem keverednek szabadon. És így kapod a három réteget, ami engem már régen az őrületbe kergetett. Amíg rá nem jöttem erre.......
200 g oxálsav-dihidrát
300 ml víz
100 ml H2SO4 37% (akkumulátorsav)
nem minden oxálsav oldódik fel - nem probléma.
Ezzel minimum 200 ml 20230-as vörös olajat lehet feldolgozni.
Tényleg erős keverés szükséges állandóan.
A víz/sav keverék újra felhasználható.
Nem 95 °C felett közvetlenül, gőz vagy egyéb desztilláció nélkül ad világossárga P2P-t.
Ha szep-tölcsért használsz akkor legjobb elválasztani amíg még forró és az oxálsav nem esik ki. vagy egy főzőpohárba teszed a fagyasztóba úgy, hogy a főzőpohár alja a hideghez érjen, így onnan kezd el kristályosodni. Ha így csinálod, akkor egyáltalán nincs szükséged oldószerre, az alulról kikristályosodó sav és víz felhajtja a P2P-t a tetejére és két-három óra múlva egyszerűen kiöntheted és NEM marad vissza P2P.
Sok munkát végeztem ezen, lol
H2SO4 és oxálsav (a legjobb), de foszforsav és bármilyen szerves sav, például ecetsav, hangyasav vagy citromsav esetén szinte mennyiségi hozamot lehet elérni, ha az elegyet lassan, két órán keresztül 95 °C-nál NEM HOSSZABB-ra melegítjük, 30 percig ott tartjuk, majd hagyjuk lehűlni. Adjunk hozzá kis mennyiségű, a DCM-től eltérő oldószert (toluol, xilol, éter), mivel a szerves sav kihullhat, ezért ajánlatos felülről gyűjteni. Használható benzin-éter 40/60, és nem kell sok, de a végén HÁROM réteget kapunk: A legfelső réteg benzin-éter, P2P oldottal. A középső réteg P2P pet-éterrel feloldva*. Alul pedig a savas keverék (ami egyébként gond nélkül újra felhasználható).
*Furcsán hangzik, de ez így van: A Pet-Ether és a P2P is oldja a másikét, de nem keverednek szabadon. És így kapod a három réteget, ami engem már régen az őrületbe kergetett. Amíg rá nem jöttem erre.......
200 g oxálsav-dihidrát
300 ml víz
100 ml H2SO4 37% (akkumulátorsav)
nem minden oxálsav oldódik fel - nem probléma.
Ezzel minimum 200 ml 20230-as vörös olajat lehet feldolgozni.
Tényleg erős keverés szükséges állandóan.
A víz/sav keverék újra felhasználható.
Nem 95 °C felett közvetlenül, gőz vagy egyéb desztilláció nélkül ad világossárga P2P-t.
Ha szep-tölcsért használsz akkor legjobb elválasztani amíg még forró és az oxálsav nem esik ki. vagy egy főzőpohárba teszed a fagyasztóba úgy, hogy a főzőpohár alja a hideghez érjen, így onnan kezd el kristályosodni. Ha így csinálod, akkor egyáltalán nincs szükséged oldószerre, az alulról kikristályosodó sav és víz felhajtja a P2P-t a tetejére és két-három óra múlva egyszerűen kiöntheted és NEM marad vissza P2P.
Sok munkát végeztem ezen, lol
↑View previous replies…
- By w2x3f5
Az anyag hozamát p2p kérjük, adja meg.
van vörös olaj? furcsa módon nekem ugyanezen szám alatt sárga olaj volt.
van vörös olaj? furcsa módon nekem ugyanezen szám alatt sárga olaj volt.
Is there any other way to isolate the phenylacetic acid besides putting it in the refrigerator? Will not separating affect my future work?
- By William D.
You can crystallize this in a cool place and filter after. In another case, you can distill the fractions. For the following steps, you cannot leave PPA.
I would like to know if this synthesis is also working with phosphoric acid ( h3pO4) I appreciate your work and time
And what would be the amount ( phosphoric acid 85%)
Currently performing a test on the substrate with 75% phosphoric acid. No exact amounts used.
Trying with about 1:2 (Precursor to Phosphoric acid), again no exact amounts used but will report back if it works at all.
Trying with about 1:2 (Precursor to Phosphoric acid), again no exact amounts used but will report back if it works at all.
Tests using 75% phosphoric acid 1:2 (substrate to acid). 1 hour and 30 minutes into the reaction. Took a small "sniff test" and I seem to be able to detect the distinct odour of phenyl-2-propanone.
Lots of bubbling in the reaction that started as early as 60 degress celcius.
Again no exact amounts was actually used as the substrate I tried was a sample purchase from a chinese vendor (not on this site). Red liquid just like the photos of the malonate everywhere, the smell was not super pleasant but not horrible. Around 100 euro per kilo (actually less considering shipping was included)
Lots of bubbling in the reaction that started as early as 60 degress celcius.
Again no exact amounts was actually used as the substrate I tried was a sample purchase from a chinese vendor (not on this site). Red liquid just like the photos of the malonate everywhere, the smell was not super pleasant but not horrible. Around 100 euro per kilo (actually less considering shipping was included)
2 hours and 23 minutes into the reaction and I can confirm 100% that 75% phosphoric acid definitely works. However the reaction is still bubbling from CO2 evolution, so the reaction is not done.
The smell of phenyl-2-propanone is now too strong to dispute. The substrate was legit.
Further experimentation needs to be done to determine optimal amount of phosphoric acid.
Previous experience: [P2NP (from benzaldehyde & nitroethane) to phenyl-2-propanone with iron powder and HCL] and [MAPA to phenyl-2-propanone with hydrochloric acid])
If I remember correctly the p2np to phenyl-2-propanone with iron powder and HCL sometimes produced phenyl-2-propanone with an acrid smell. however the smell of the phenyl-2-propanone from the malonate is extremely sweet and that of pure phenyl-2-propanone.
Will store the resulting phenyl-2-propanone as a powder by reacting it with metabisulfite.
edit: Also beware of alibaba sellers of BMK precursors, one of them was not legit. (check the bot reviews, the fake sellers strictly sell precursors and have fake reviews of GBL and synthetic cannabinoid indole derivatives)
The smell of phenyl-2-propanone is now too strong to dispute. The substrate was legit.
Further experimentation needs to be done to determine optimal amount of phosphoric acid.
Previous experience: [P2NP (from benzaldehyde & nitroethane) to phenyl-2-propanone with iron powder and HCL] and [MAPA to phenyl-2-propanone with hydrochloric acid])
If I remember correctly the p2np to phenyl-2-propanone with iron powder and HCL sometimes produced phenyl-2-propanone with an acrid smell. however the smell of the phenyl-2-propanone from the malonate is extremely sweet and that of pure phenyl-2-propanone.
Will store the resulting phenyl-2-propanone as a powder by reacting it with metabisulfite.
edit: Also beware of alibaba sellers of BMK precursors, one of them was not legit. (check the bot reviews, the fake sellers strictly sell precursors and have fake reviews of GBL and synthetic cannabinoid indole derivatives)
Last edited:
Appreciate your work hope we can get a detailed syntheses of phosphoric acid. I have 85% of phosphoric acid and hope to find a way that is working
Take notice: Ignore the 5 hour bullshit, it was not enough for me with 75% phosphoric acid. I ended up with way too much oil than theoretically possible. i.e. it was a mixture of the precursor and product, the precursor had not fully reacted. (I also detected the precursor smell when working up the reaction). This is a big problem according to me as they are annoying to separate from eachother. Therefor it is important, imo, to run the reaction to completion, I'd rather have bi-products or some slight polymerisation from running the reaction longer than unreacted precursor.
Better to end the reaction when it no longer is bubbling or bubbling very little.
Also don't wait for a detailed guide. Just try it yourself using small amounts.
Either use a 1:1 or 1:2 ratio of precursor to phosphoric acid. This is not that complex.
Better to end the reaction when it no longer is bubbling or bubbling very little.
Also don't wait for a detailed guide. Just try it yourself using small amounts.
Either use a 1:1 or 1:2 ratio of precursor to phosphoric acid. This is not that complex.
May I ask which solvent can be used instead of ether?
Use any compatible solvent, Such as DCM, MTBE etc etc.
The solvent needs to follow 2 criteria,
* Should not be too easy to hydrolyse (e.g. ethyl acetate hydrolyses in basic conditions, so if used you have to minimize it by either low % NaOH solution or be fast)
* Needs to be non polar and not misicible/soluble in water.
Preferably low boiling point so it can be removed easy later, but if that is not a concern for you
you also got things like toluene
I currently use an ether but not diethyl.
The solvent needs to follow 2 criteria,
* Should not be too easy to hydrolyse (e.g. ethyl acetate hydrolyses in basic conditions, so if used you have to minimize it by either low % NaOH solution or be fast)
* Needs to be non polar and not misicible/soluble in water.
Preferably low boiling point so it can be removed easy later, but if that is not a concern for you
you also got things like toluene
I currently use an ether but not diethyl.
↑View previous replies…
May I ask if I can still succeed by adding 20% alkaline solution after heating and refluxing, but the pH value can only reach 7?
Sorry you have to be clearer in your writing mate.
An alkaline solution can never be below 7, alkaline is just chemistry speech for "basic" (i.e. above 7 on the pH scale)
Why is it important for you too not go below 7? (or above 7)?
Please tell me which reaction and chemicals you intend or are currently using. You doing the sulfuric acid variant, phosphoric acid or saponification + hydrochloric acid variant?
An alkaline solution can never be below 7, alkaline is just chemistry speech for "basic" (i.e. above 7 on the pH scale)
Why is it important for you too not go below 7? (or above 7)?
Please tell me which reaction and chemicals you intend or are currently using. You doing the sulfuric acid variant, phosphoric acid or saponification + hydrochloric acid variant?
Heating reflux for 5 hours, adding 20% sodium hydroxide solution to the ice bath, the pH value is stuck at 7
Assume you meant you added the alkaline to the reaction mixture while it's in a ice bath. Anyway if the pH value is stuck at 7, your pH meter or pH paper doesn't work correctly. What are you using to measure the pH?
And what acid did you use?
Edit:
The first guy who replied to this thread said the following (note the pH thing with the saponification or whatever)
"Perform CAS 20320-59-6 official procedure After 4 hours of reaction at 80°C, stop heating, then adjust the alkali pH with sodium hydroxide, until 7, it can't go up, stratification appears, the oil layer is on top, and then ether extraction is added, and the stratification begins, and the ether layer is extracted, and the upper layer starts, and the distillation at atmospheric pressure at 220° keeps going up, and the temperature keeps it at 110°, and a lot of liquid is distilled, and I think it's ether, and then it starts to appear, and this phenomenon in the flask I thought it would be 216° distillation to produce P2P, but there is no problem How can I remedy it "
And what acid did you use?
Edit:
The first guy who replied to this thread said the following (note the pH thing with the saponification or whatever)
"Perform CAS 20320-59-6 official procedure After 4 hours of reaction at 80°C, stop heating, then adjust the alkali pH with sodium hydroxide, until 7, it can't go up, stratification appears, the oil layer is on top, and then ether extraction is added, and the stratification begins, and the ether layer is extracted, and the upper layer starts, and the distillation at atmospheric pressure at 220° keeps going up, and the temperature keeps it at 110°, and a lot of liquid is distilled, and I think it's ether, and then it starts to appear, and this phenomenon in the flask I thought it would be 216° distillation to produce P2P, but there is no problem How can I remedy it "
Last edited: