Download Video
Novator

Meth Via Ephedrine-Hypophosphorous Acid Synthesis

This method describes how to turn racemic ephedrine hydrochloride to methamphetamine via relatively simple reaction with iodine (I2) and hypophosphorous acid (H3PO2).

https://bbgate.com/threads/methamphetamine-synthesis-from-ephedrine-by-using-i2-and-h3po2.10423/#post-56705
It's an easier method for amatuers, but the yield it's kinda good, problem is that, Hypophosphorous acid, or sodium hypophosphite it's not for sale to individuals, so to get hypophosphorous acid or Na HPP it's a pain in the ass
 
Thanks to the members of this site for uploading this video because it has been a long time since I searched for this method 🙏🙏🙏
 
I think you got your temperatures wrong or mixed up with red p/I2 synthesis. Heating this reaction up to 160 deg would be dangerous. Heating above 110°C causes hypophosphorous acid to undergo disproportionation to give phosphorous acid and phosphine gas which can and will spontaneously ignite. Phosphine is extremely toxic. I don’t recommend heating this over 100 deg Celsius .
 
Next time, show us the production process with the gradual addition of iodine, the so-called "Czech way" or "2x20 minutes". It is the fastest reaction. A lot of people here are interested. Thank you
 
hi there, can you help me with something, im note sure about the rations by reaction of 3000g ephedrine via H3PO4 . Last time by reacting 1000g of ephedrin by temperature 130C for 8 hours i used 1500 g of iodine and 630 ml of H3PO4 and 600 ml H2O...ineed to be sure about the rations. Please can confirm or maybe give me som advice if im doing something not corect, thanx in advance
 
Next time, show us the production process with the gradual addition of iodine, the so-called "Czech way" or "2x20 minutes". It is the fastest reaction. A lot of people here are interested. Thank you

If you need any info about the 1 hour reaction then write to me.I'll advise you, I've been at home for 10 years
 
I have some questions for the comunity I am doing a cook that i have done years ago and I am at a step that im not sure exactly what the processes were im 99 percent that I have it correct but wanted to talk to this lovely bunch of law abiding citizens and see if there was some insite i could get. OK here it is I have done a crockpot cook with nitro mentane gas gun blue number 9 and welding rods putting the rods on the bottom of the crock pot and sealing the pot cook on high for 12 hours and off for 12 and the end result is a nice orange colored crystal that is bar non the best for such a quick and easy cook. the question I have is in the process with the fuel and the blueing is there a need for activated charchole in the process or not. There was also another way in which was a cold cook with a fish tank I observed that used the charchole I thing I got them a little meshed together considering its been 10 or so years since I have seen this process. If anyone could give me sone insite I would be grateful and so would the people observing the process.
 
Hey guys how’s it going been reading all your stuff for the past few weeks and I’ve got EVERYTHING TO GET STARTED. Only issue is I’ve been going around d getting the BTC Sudafeds the 60mg ones with red coating according to the information 100 pill should contain 6g of pseudo I managed to get 3.5 using ethanol. Can anyone help me out to source some please. Been looking on Dark net but I keep seeing multiple items with same images for example ephedrine is being sold with same images as pseudo and prices range dramatically please someone help me out much appreciated
 
hi there, can you help me with something, im note sure about the rations by reaction of 3000g ephedrine via H3PO4 . Last time by reacting 1000g of ephedrin by temperature 130C for 8 hours i used 1500 g of iodine and 630 ml of H3PO4 and 600 ml H2O...ineed to be sure about the rations. Please can confirm or maybe give me som advice if im doing something not corect, thanx in advance
Hi bro how’s it going give me a message when you see this reply much appreciated
 
hi there, can you help me with something, im note sure about the rations by reaction of 3000g ephedrine via H3PO4 . Last time by reacting 1000g of ephedrin by temperature 130C for 8 hours i used 1500 g of iodine and 630 ml of H3PO4 and 600 ml H2O...ineed to be sure about the rations. Please can confirm or maybe give me som advice if im doing something not corect, thanx in advance
Hey, first off H3PO4 is phosphoric acid - you must use hypo. I hope that was a typo and you already know this. 630mL of water is way too much - you only add a couple drops so it refluxes. For 1kg of ephedrine I'd probably use 50mL.

I do: 1 PSE/EPH : 2 : 1 H3PO2, in that order too as I believe it's more stable. So PSE, a couple drops of H20, H3PO2 then add all the I² in one lot then quickly connect the condenser, duct taping around the joint to prevent leakage. I add the I² quickly because I want to connect the condenser before it reacts into the atmosphere, which affects the yield.

I reflux @ 250°C and have a 2L Coke bottle connected to the condenser via ~20cm of 10mm vinyl tubing. This acts as a pressure valve, the pressure needs to be burped out for the first 15 mins of the reaction until no more pressure builds up - which is when you screw it shut. Don't panic when the bottle sucks in, that's when you leave it alone to react. In the bottle I have about 375mL of H20 to help absorb any HI/phosphine gas, rather than having it smoke up the house.

Overall reflux time is 1 hr 45 mins for pseudoephedrine (PSE) & for ephedrine 3 hrs 30 mins. Any longer and you're wasting your time and red-lighting yourself.

There is a bit to take in so I've narrowed it down below 👇

So, what you're doing wrong is:
• using phosphoric acid (H3PO4),
• not using enough iodine,
• and using way too much H2O.
Fix all that up and you should end up with good product.

If you can't be bothered making the Coke bottle pressure valve, keep the temperature at 150°C. You don't need this on the end of your condenser, but I do it every time.

ONE LAST THING! MUST READ!

NEVER let anything that's come into contact with pseudo/ephedrine touch the end product! This will revert your product back to PSE and you'll be wondering why it still tastes like pseudo when you smoke it. Use seperate funnels and jugs and stuff for pseudo and seperate funnels and jugs and stuff for meth.

I'm pretty sure that fuck all people don't know this as it's never mentioned in any recipe.

Anyway, all the best. Do it properly next time or you're just wasting your time & money. I hope this helps with the next lot, although I'm probably too late.
 
Hey, first off H3PO4 is phosphoric acid - you must use hypo. I hope that was a typo and you already know this. 630mL of water is way too much - you only add a couple drops so it refluxes. For 1kg of ephedrine I'd probably use 50mL.

I do: 1 PSE/EPH : 2 : 1 H3PO2, in that order too as I believe it's more stable. So PSE, a couple drops of H20, H3PO2 then add all the I² in one lot then quickly connect the condenser, duct taping around the joint to prevent leakage. I add the I² quickly because I want to connect the condenser before it reacts into the atmosphere, which affects the yield.

I reflux @ 250°C and have a 2L Coke bottle connected to the condenser via ~20cm of 10mm vinyl tubing. This acts as a pressure valve, the pressure needs to be burped out for the first 15 mins of the reaction until no more pressure builds up - which is when you screw it shut. Don't panic when the bottle sucks in, that's when you leave it alone to react. In the bottle I have about 375mL of H20 to help absorb any HI/phosphine gas, rather than having it smoke up the house.

Overall reflux time is 1 hr 45 mins for pseudoephedrine (PSE) & for ephedrine 3 hrs 30 mins. Any longer and you're wasting your time and red-lighting yourself.

There is a bit to take in so I've narrowed it down below 👇

So, what you're doing wrong is:
• using phosphoric acid (H3PO4),
• not using enough iodine,
• and using way too much H2O.
Fix all that up and you should end up with good product.

If you can't be bothered making the Coke bottle pressure valve, keep the temperature at 150°C. You don't need this on the end of your condenser, but I do it every time.

ONE LAST THING! MUST READ!

NEVER let anything that's come into contact with pseudo/ephedrine touch the end product! This will revert your product back to PSE and you'll be wondering why it still tastes like pseudo when you smoke it. Use seperate funnels and jugs and stuff for pseudo and seperate funnels and jugs and stuff for meth.

I'm pretty sure that fuck all people don't know this as it's never mentioned in any recipe.

Anyway, all the best. Do it properly next time or you're just wasting your time & money. I hope this helps with the next lot, although I'm probably too late.
Hi Bro...Let me ask you for advice. I did the reaction according to your instructions, it worked great . But I want to ask, I use toulene after the reaction and I would like to stop it and use the distillation and ingredients used in the video, I'm just not sure what amounts I should use after the reaction 1000g of ephedrine if I follow the instructions. How much water do I put in the bottle after the reaction? How much NaOH do I add and in what proportion? How much sodium thiosulfate? How much DCM? How much sodium sulfate? I don't want to do attempts and run out of money so I'd rather ask.Thank you for your answer ;)
 

Media information

Category
Synthesis of Amphetamines (Phenylethylamines)
Added by
Novator
Date added
View count
11,344
Comment count
18
Rating
5.00 star(s) 1 ratings
Top