Har någon fått en solid, beprövad syntes av n, n-DET från tryptamin?

[Rabidreject]

Det är allt verkligen i titeln men ärligt talat, jag skulle vara intresserad av någon av de primära tryptaminerna som kan tillverkas av tryptamin - annat än n, n-DMT.

Iv lyckades med DMT-syntes från tryptamin - vilket är trevligt, första fullständiga läkemedelssyntesen. Det är en trevlig känsla - annorlunda än att extrahera, särskilt eftersom de flesta människor helt enkelt inte skulle veta skillnaden!

Hur som helst, om jag inte kan göra något annat i små mängder för att prova för första gången så kommer jag att göra en stor mängd och sälja för att finansiera mitt nästa projekt och kanske till och med en rotovap eftersom jag är super lat och skulle vilja beställa mindre kemikalier samt göra mindre destillationer!

Hur som helst ja, jag har mycket tryptamin kvar så....yeah lol

Jag glömde typ av hur mycket DMT faktiskt är värt. Det kan bara vara värt att jag förvandlar allt till DMT eftersom tryptamin verkligen är lätt att komma lätt att gå lol

Hur som helst
Jag räknar med smarta killar. Jag har en roterande vingpump nu så jag kan dra ett litet vakuum runt 1tor eller strax över så jag antar att det öppnar upp nya destillationsmöjligheter men jag kan ha fel och det kanske inte gör någon skillnad haha

 

[Rabidreject]

I would like to get back to this now I have a little experience actually. I heard some good tips on a podcast surrounding this whole reductive amination reaction.
It is annoyingly finicky - I have heard that depolymerising paraformaldehyde in methanol is a bit of a game changer.

 

[mycelium]

https://www.erowid.org/library/books_online/tihkal/tihkal03.shtml

Here you go, there is an entry further down starting from tryptamine

 

[mycelium]

Can't read that on TOR, so here is copy pasta

(from tryptamine) To a solution of 1.6 g tryptamine base in 20 mL isopropanol, there was added 5.5 mL diisopropylethylamine and 2.3 mL ethyl bromide. After stirring at room temperature for 36 h the volatiles were removed under vacuum on the rotary evaporator and the light brown residue (5.17 g) was treated with 5 mL of acetic anhydride and heated in the steam bath for 5 min. After coming to room temperature, 3.5 mL ammonium hydroxide was added, and the exothermic reaction was allowed to return to room temperature. The reaction mixture was suspended in 150 mL 0.5 N H2SO4, and washed with 3x40 mL CH2Cl2. The pooled washes were again extracted with 150 mL 0.5 N H2SO4 and the aqueous phases again washed with CH2Cl2. The aqueous phases were combined, made basic with 6 N NaOH, and then extracted with 3x40 mL CH2Cl2. The pooled extracts were stripped of solvent under vacuum, and the residue (1.49 g of a dark oil with a sharp smell) was distilled at the KugelRohr. The product, N,N-diethyltryptamine, distilled at 175-185 °C at 0.05 mm/Hg to yield a white oil weighing 1.02 g, which spontaneously crystallized. This product was dissolved in 20 mL boiling hexane, cooled to room temperature, and seeded. There was thus obtained 0.72 g of a white waxy crystalline material melting at 84-87 °C. IR (in cm-1): 741, 804, 970, 1018, 1067, 1090 and 1120. MS (in m/z): C5H12N+ 86 (100%); indolemethylene+ 130 (6%); parent ion 206 (1%). The hydrochloride salt (crystallizing spontaneously from an IPA solution of the base treated with a few drops of concentrated HCl) had a mp 169-171 °C, and the following fingerprint: IR (in cm-1): 717 (br.), 759, 847, 968, 1017, 1110. This salt appears to be unstable, darkening with time.

 

[mycelium]

I know DMT in 510 cartridges like we use for THC distillate, is awesome on the dark web, they sell half gram carts. And it is relatively popular because only of convenience of carts, and DMT!
If you go that route, look up the 50ml device on cart farm, much better feel than any other cart fillers (I had the 250ml and loved it)

 

[mycelium]

I know DMT in 510 cartridges like we use for THC distillate, is awesome on the dark web, they sell half gram carts. And it is relatively popular because only of convenience of carts, and DMT!
If you go that route, look up the 50ml device on cart farm, much better feel than any other cart fillers (I had the 250ml and loved it)

 

[Rabidreject]

Oh yeah I did see shulgin’s method but that’s not from tryptamine….you could also obviously do a speeter-antony type synthesis but it’s obviously NOT something I am going to be doing in my bedroom! Ha

I would imagine using acetaldehyde instead of formaldehyde in the reductive amination would firstly remove the whole water thing, allowing you to keep it completely anhydrous, but i would imagine the slightly bulkier alkyl group to stop it being quite as prone to the competing PS reaction….just a guess tho so far. Will try it soon

 

[mycelium]

I quoted it up above, it was from tryptamine, but it wasn't at the begining of the entry, it was half way down

Here it is again:

(from tryptamine) To a solution of 1.6 g tryptamine base in 20 mL isopropanol, there was added 5.5 mL diisopropylethylamine and 2.3 mL ethyl bromide. After stirring at room temperature for 36 h the volatiles were removed under vacuum on the rotary evaporator and the light brown residue (5.17 g) was treated with 5 mL of acetic anhydride and heated in the steam bath for 5 min. After coming to room temperature, 3.5 mL ammonium hydroxide was added, and the exothermic reaction was allowed to return to room temperature. The reaction mixture was suspended in 150 mL 0.5 N H2SO4, and washed with 3x40 mL CH2Cl2. The pooled washes were again extracted with 150 mL 0.5 N H2SO4 and the aqueous phases again washed with CH2Cl2. The aqueous phases were combined, made basic with 6 N NaOH, and then extracted with 3x40 mL CH2Cl2. The pooled extracts were stripped of solvent under vacuum, and the residue (1.49 g of a dark oil with a sharp smell) was distilled at the KugelRohr. The product, N,N-diethyltryptamine, distilled at 175-185 °C at 0.05 mm/Hg to yield a white oil weighing 1.02 g, which spontaneously crystallized. This product was dissolved in 20 mL boiling hexane, cooled to room temperature, and seeded. There was thus obtained 0.72 g of a white waxy crystalline material melting at 84-87 °C. IR (in cm-1): 741, 804, 970, 1018, 1067, 1090 and 1120. MS (in m/z): C5H12N+ 86 (100%); indolemethylene+ 130 (6%); parent ion 206 (1%). The hydrochloride salt (crystallizing spontaneously from an IPA solution of the base treated with a few drops of concentrated HCl) had a mp 169-171 °C, and the following fingerprint: IR (in cm-1): 717 (br.), 759, 847, 968, 1017, 1110. This salt appears to be unstable, darkening with time.

Let us know how it works bro

 

[G.Patton]

He was looking up DET, not DMT.

 

[mycelium]

He was looking up DET, not DMT.