MDMA Synthesis From PMK

MDMA Synthesis From PMK (MDP2P)

Introduction

The following method shows that the NaBH4 reduction actually is superior to all other common routes used in clandestine chemistry and this method allows to scale MDMA synthesis unlike aluminum amalgam reduction. The method is quite simple, it doesn't take expensive equipment. Procedures with the reaction mixture are simple and efficient. This method is very usefull for big scale production of MDMA and gives high yields (90%+).

There is a relatively fast formation of the imine and the imine is reduced rapidly. There's no reduction of the ketone to the secundary alcohol. In similar reactions, the water that is produced during the forming of the imine (Schiff Base) is removed from the reaction before the imine is reduced with drying salt, or molecular sieves, or by using toluene as the solvent, so the water and the toluene form an azeotrope.

Difficulty rating: 5/10

Reagents:

  • Methylamine gas (MeNH2) 300 g;
  • Methanol (MeOH) 3000 g;
  • 3,4-Methylenedioxyphenylpropan-2-one (MDP2P; PMK; cas 4676-39-5) 1000 g;
  • Sodium borohydride (NaBH4) 100 g;
  • Distilled water (H2O) 8 L;
  • Hydrochloric acid 8 mL 33% HCl;
  • Dichloromethane (DCM) 200 mL;
  • Acetone 4 L;
  • Sodium hydroxide aq solution 30% (NaOH aq) 200 mL;

Equipment and glassware:

  • Reactor 20 L, equipped with thermomether and overhead stirrer;
  • Freezer;
  • Retort stand and clamp for securing apparatus;
  • Syringe or Pasteur pipette;
  • pH indicator papers;
  • Beakers (2 L x2, 1 L, 500 mL x2);
  • Bucket 20-30 L;
  • Vacuum source;
  • Laboratory scale (1-1000 g is suitable);
  • Measuring cylinders 1000 mL and 100 mL;
  • Cold water bath;
  • Glass rod and spatula;
  • Laboratory grade thermometer;
  • Buchner flask and funnel;
  • Filter paper;
  • Wet towel;
  • Vacuum distillation kit;
  • HCl gas source;
  • Hose (optional);
  • Heating plate or heating mantle;

Procedures

Reagents preparation

Methylamine gas (MeNH2) 300 g is dissolved in chilled 3000 g methanol (MeOH; -17-20 °C) in 20 L reactor, equipped with thermomether and overhead stirrer. The mixture is cooled down to 5 °C. The stirrer is turned on and MDP2P 1000 g is added.

Notes: Methylamine (MeNH2) gas 300 g is made by reaction of methylamine hydrochloride (MeNH2*HCl) with sodium hydroxide (NaOH).

PMK Reduction to MDMA

Sodium borohydride (NaBH4) 100 g is added in portions, one teaspoon per ~5 min, H2 gas bubbling has to disappear before next addition (wash down with methanol). Temperature is maintain between 8-10 °C. Sodium borohydride (NaBH4) addition is taken 2-7 h. The mixture is stirred for 2 days. The stirring time can be reduced to 4 h for people in a hurry, 10-20% will be lost.

Notes: When the reaction vessel is opened it should be covered by a wet towel, so that the methylamine gas can be absorbed by the water. 1 L Water can absorb 1000 L NH3 gas. An airlock can be used for that goal as well. Do not airtight the flask, let a thin hose out the window (or a fume hood), wrapped at the end with a wet towel.

Distilled water (H2O) 8 L with 8 mL 33% HCl is added to the reaction mixture with a constant stirring. Reaction mixture is turned to greenish brown color, pH 10.5 (11 is better than 10). When green soap is started to form, it means that you've added far too much HCl. MDMA free base will settle on a reaction vessel bottom. Organic layer is drained out (separated).

DCM 200 mL is added to the reaction vessel with water layer and the mixture is stirred for 10 min. The stirrer is stopped and reaction mixture is left 30 min. DCM with the rest MDMA freebase will settle on the vessel bottom. Organic layer is drained out and extracts are combined. There is ~1750 mL of MDMA free base and DCM.

Notes: You can basify the water layer again with conc. NaOH solution to pH 13-14 and drain out MDMA free base residue again.

Purification

A vacuum distillation setup is prepared. Methanol, DCM, water and other low boiloing substances are distilled off at 130 °C firstly. Then, a heater is set at 165 °C, little drops of MDMA oil are condensated and seen around 140-145 °C; at 160-165 °C (20-18 mbar) MDMA oil is distilled intensively. The clean MDMA free base distillation yield is ~ 1.0 L.

A membrane vacuum aspirator is sufficient to distill off water, methanol and other low boiling substannces from the reaction mixture. A decent vacuum pump is recommended to distill MDMA free base.

 

Crystallization

MDMA free base is mixed with clean, cold (-10 to -20 C), dry acetone 1:4, dry HCl gas is bubbled through this solution to reach pH 7-6.5. It have to be done carefully. A thick, white crystal mass will be formed after ~5 min bubling. pH Have to be checked frequently with pH-meter or indicator paper. If the solution become hot, place it into a big freezer to cool it down and continue with a next cold batch. Be very carefull and don't drop pH below 7 to 6.5 because MDMA*HCl crystalls will dissolve again. In this case, you have to add NaOH base solution again until pH rise up to 7. At least 200 mL base have to be kept ready for spare case of mistakes. The acetone/powder mix is filtred and dried on Buechner funnel with aspirator vacuum. Then, MDMA*HCl is dried again on a Pyrex dish under A/C or a slow blowing fan flow in a dry room.

Bibliography

Gallagher, Ryan, Ronald Shimmon, and Andrew M. McDonagh. "Synthesis and impurity profiling of MDMA prepared from commonly available starting materials." Forensic science international 223.1-3 (2012): 306-313. https://www.sciencedirect.com/science/article/abs/pii/S0379073812004604

Heather, Erin. The Synthesis and Chemical Profiling of 3, 4-Methylene-Dioxymethamphetamine (MDMA) and Analogues. Diss. University of Technology Sydney (Australia), 2020. https://search.proquest.com/openview/6196f26325adbfdb0055d603833b43ef/1?pq-origsite=gscholar&cbl=2026366&diss=y

  1. DMTrott

    Random Recovery Tips From An Ageing Psychonaut

    What is it like being old and taking drugs? What is different compared to taking them when younger? Are there any differences at all? Yes there are. In fact, depending upon the drug in question, quite a few changes come with experience and age; but the most obvious physical manifestation...
  2. U

    MDP2P purification method?

    What would be the best and preferably simple solution for purifying MDP2P? If my PMK oil is currently brown/dark yellow, would that cause problems in subsequent reactions, or would the impurities just remain in the final product?
  3. SuperFRZ

    Deal with Africa / MDMA

    Guys, I spoke with some sellers here but to no avail. I think they are small merchants and do not have good ambition. I am from a country in Africa directly overlooking Europe and I have proper transportation methods to my country. I need a real supplier to deal with me to import MDMA to my...
  4. fidelis

    MDMA synthesis starting with extraction of piperine (links)

    let me preface this by saying yes, i know @WillD made a lovely thread, but these links go "further back" and start the process earlier. his synth starts with MDP2P which is in the second to last/last links on this list. i just wanted to put that out there so this doesn't get considered redundant...
  5. I

    Constructing a large-scale MDMA laboratory

    Previously, NaBH4 was used for production, but to expand production, I want to change the method to H2/PtO. Does anyone know that the metal can be replaced by Pd? Does anyone provide teaching services to help me build a 1-ton production line? The amount can be discussed in detail.
  6. 2

    Sassafras for sale?

    MDMA 
    Does anyone have any Sassafras for sale?
  7. 2

    521097-97-2 (R)-1-(3,4-Methylenedioxyphenyl)-2-propanol to sell?

    MDMA 
    Best I can tell, this is not a regulated substance in the US. Is anyone willing to synthesize this and sell it ? That would allow me to use the rest of cGMP chemicals I purchased.
  8. W

    HELP ASAP MDMA MENTAL BREAKDOWM

    Question 
    Okay so to keep it simple I had one of my fellas empty thousands of caps after we had just done them all up because we had the bright idea of rerocking the mdma in order to sell it faster well we now have 500 grams of sludge/mdma liquid goop in a pot and no idea how to save it…. we dont want to...
  9. I

    Please help me, regarding MDP2P production of MDMA

    I tried a few small test pieces. Because I was in a hurry, I did not react to NaBH4 for two days, but for 4 hours. I used 50g of MDP2P oil to test, and finally only got 25g of MDMA base, and from this 25g of MDMA base, I finally got only 4g of white powder. I have encountered some questions and...
  10. L

    tdp5 pill press issues

    Question 
    hello im currently having issues with my tdp-5 pill press im currently pressing mdma/ectasy pills my issue im running into is some pills will come out fine ill have like 10 come out fine then 10 come out messed up or broken ive tried everything from different mixes to adjusting the machine im...
  11. MisterAnonymous

    MDMA Recrystallization!?

    Question 
    Hello, I just made a batch of mdma but i want bigger crystals. Does anyone know how i can perform recrystallization with mdma? Thanks in advance!
  12. P

    Request for Consultation on MDMA via Catalytic Hydrogenation

    Hello there, Currently working with some collaborators to set up production of MDMA at considerable scale. It seems that anything beyond maybe a few kilos at a time requires a proper high-pressure setup for catalytic hydrogenation. Of course this is quite sophisticated and hazardous work...
  13. A

    Step on it!!!!

    Question 
    So I've never seen anyone post specifically about what I'm about to here. A friend of mine is dealing with some clients who are trying to get way more than what it's worth out of him for a ridiculously cheap price. They repeatedly complain as if it's his fault and not theirs for trying to punk...
  14. fidelis

    isosafrole using Fe(CO)5

    synthesis by raffike from the vespiary :3 pls note that Fe(CO)5 is super toxic and "it's recommended to do the reaction under a fume hood or with good ventilation" Reagents: ᗢ 500 grams of safrole distilled from Ocotea Cymbarum ᗢ 3 grams of technical +98,5%NaOH ᗢ 3 grams of lab grade Fe(CO)5...
  15. fidelis

    ethyl nitrite wacker ketone synthesis (better than benzo wacker?)

    original synth/writeup by krz and potisgood respectively, enjoy (not two links, was unable 2 locate krzs post. either way, i suggest opening it cuz the replies have important info ^_^ the synth will still work but one step may be unnecessary, need someone 2 check 4 me bc im not a chemistry...
  16. fidelis

    link to project blackbook (for beginners)

    link here just make sure to read the replies and pay attention to the corrections in red text!! :3
  17. fidelis

    link to "detailed methods for non-chemists"

    hey :3 i would copy-paste this like i usually do with vespiary stuff but theres a lot of info so i decided 2 leave it in link form. there are many syntheses and theyre easy 2 read and perfect for beginners. enjoy! http://www.thevespiary.org/rhodium/Rhodium/hive/hiveboard/methods/000023325.html
  18. supsbraking

    Searching amph in l'Arenal

    Amphetamine 
    Hallo 2 zusammen, wir sind morgen in l'Arenal und suchen nach Amphetamin und MDMA f2f. Wenn jemand da ist, kontaktieren Sie mich bitte per PN. Thx alot
  19. fidelis

    al/hg mdma (for beginners)

    original synth by bright star, just felt the need to post here ^^; hopefully this isnt a repost since this looks very promising What you need: This list is the basics. Do not even start this without ALL the Chemicals and Apparatus. (Cost should be 800-ish dollars) Apparatus and Glass: ✮ 'The...
  20. fidelis

    carbamate route to mda/mdma

    haiii i havent seen this posted here yet. i stole it from the vespiary, so heres the original thread :3 (i added numbers to make things easier, lmk if i need to fix anything) There are some very promising, unexplored synthesis routes from alpha-methyl-3,4-methylenedioxypheny-propionamide to...
Top