Methamphetamine synthesis from P2P by NaBH4 reduction. Medium-Scale.

[btcboss2022]

Hello,

After many tests using Methylamine HCL based on this method I will share the best way that I found to obtain Methamphetamine freebase in big scale:

• 966 gr P2P​
• 14 liters Methanol
• 1183 gr Methylamine HCL​
• 638gr NaOH​
• 452 gr Anhydrous Sodium Sulfate​
• 105 gr NaBH4​
• 35 L distilled water​
• 7 Liters DCM​

- Fill the reactor with the 14 L of Methanol
- With stirring dissolve the Methylamine HCL
- Put the reactor temp at 0C(not the mixture temp) and add the NaOH, the temp will increase
- Once the temp come back to 20C add the P2P, the temp will increase stir it during 45min-1 hour
- Add 252gr of anhydrous sodium sulfate
- When the mixture temp arrives to 8C start adding portionwise the NaBH4 not exceeding the 20C
- Once all the NaBH4 has been added let it mixing under 20C during aprox 2 hours until the mixture stops bubbling
- Add the water and continue mixing during 5 min
- Add the DCM and mix it during 10 min
- Stop stirring and let layers get separated
- Keep the bottom layer and discard the upper one( not profitable to extract this aqueous phase)
- Add 200gr of anhydrous sodium sulfate to the saved layer and mix it
- Filter it in Buchner Funnel
- Evaporate the DCM
- Clean and smelly Methamphetamine freebase obtained

;-)

 

[snowbones]

Is the 35 litres of water added to ensure seperation of the dcm and water cos of the methanol present to stop it all mixing?
and are you using a 100 litre HDPE paint bucket as the reaction vessel?

 

[Atompower]

Has any one trying this method of btc boss and had success with his write up

 

[William D.]

This looks like a working method, but some reagents and conditions can be changed.

 

[rage565]

Is there a video of this procedure available?

 

[G.Patton]

Have you tried to open Video section?

 

[Grubby]

Is 15g of NaBH4 enough as the reducing agent for 138g of P2P? Or should I add a small amount of reducing agent to avoid some side reactions?

 

[G.Patton]

Hello, yes it's not enough. You have to add at least equimolar amount 38.91g of NaBH4. It's even worth to add a little more, ~1.1 eqviv 42.8g.

 

[Grubby]

Idol, there must be a special reason why you choose to use less reducing agent! For example, to avoid certain side reactions or to favor certain steps? Please Master, please enlighten me on the mystery behind this.